Static Mapping of Serial Devices in Linux

    Some time ago, I wrote about how to setup a Linux-based console server. But, there is one problem… if you reboot, your serial devices may have moved. So, to fix that, we will use UDEV to statically map the serial devices to non-changing names. Plug in your usb converter and run the command ‘dmesg’. Look for where it was mapped to. In my case, it is ttyUSB1 usb 3-2: new full speed USB device using uhci_hcd and address 5 usb 3-2: configuration #1 chosen from 1 choice pl2303 3-2:1.0: pl2303 converter detected usb 3-2: pl2303 converter now attached to ttyUSB1 Now, th...
More