Getting user-mode after logging in with aaa user at privilege 15

Had an interesting issue today.  I enabled AAA Authentication on a used Cisco 3560 switch.  I then created a user with privilege 15.  But, every time I used either telnet or SSH, I was always getting User Mode.  I wanted Priveleged Mode. Since the highest level of privilege commands is 15, I should be getting full permissions if my user is ALSO set at privilege 15, right?  Well, it does, but first there was a tiny configuration that needs to happen.  First, let's enable AAA on the device: big-old-switch(config)# aaa new-model Now, let's create a user: big...
More